On the Active Directory tab you can configure Active Directory authentication. You just need a user account in Active Directory to configure this.

See also:

Settings

  • Default domain
    To improve user experience enter the default domain, so users belonging to the domain can sign in with username. Users not belonging to the domain would have to sign in with domainname\username.
  • Active Directory server address
    The address of your Active Directory (AD) server.
  • Active Directory server port
    Default TCP ports:
    • Secure LDAPS: 636
    • LDAP: 389
  • Enable secure LDAPS
    Uncheck this to use the LDAP protocol.
    Remember to set the port correctly.
  • Network
    A computer must be online on the Network1 (the default network), otherwise the on-premise Active Directory server can not be contacted for authentication and you will see the message: No connection to Active Directory server. If the Active Directory server is not on the default network, then select the network it is on. We recommend installing Printix Client on an extra computer with permanent network access. You could for example install Printix Client on an existing on-premise server.

Test

  1. Select Test.
  2. Select Save if the test was successful. Otherwise correct the settings and repeat the test.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment