This describes a “green field” scenario, where you want to have Printix installed and configured before users move into the new office/site. Follow the steps below to build your print infrastructure.


  • You should be connected to the network at the new site.
  • Printers are powered on and on the network.
  • Make the recommended: Implementation setup.

Step 1: Install

Download the Printix Client software and install it on a computer at the new site. The computer should run the same Windows/macOS editions the users will be using, for example Windows.

  • Printers are discovered and registered in the Printix Cloud.

Step 2: Set up print queues

Open the Printers page to see Printer properties and Print queue properties. If not all of your printers are listed on the Printers page, then add the missing printers.

  • Optionally rename printers and print queues.
  • Refine the print queue setup by adding print drivers and make print driver configurations to configure Installable Options (such as Paper trays, Duplexer, Staple, Hole punch, and Output bins), and for example Form to tray Assignment.
  • For each of the additional Windows/macOS editions to be used in the organization, for example Windows 7 ×64, install Printix Client and add print drivers and make print driver configurations.
  • Test that printing via the added print queues works as intended on the Windows/macOS editions to be used.

Step 3: Deploy Printix Client to computers


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment