Last modified 2024/03/28.


  • As a general rule, Printix Go supports Kyocera printers and MFPs that are compatible with Kyocera’s software development platform HyPAS (Hybrid Platform for Advanced Solutions) generation 2 or later and the WebKit browser.
  • KYOCERA Net Viewer version 6.3 or later MUST be used to install Printix Go.
  • Card Authentication Kit must be installed on Kyocera MFPs to support card readers.
  • Printer’s date and time must match the local time.
  • Printer administrator password must be set and cannot be blank.
  • Printer’s DNS server must be configured.
  • Computer with Printix Client version 1.3.1190 or later must be online on the printer’s network during installation and use of Printix Go.
  • In addition to the required internet endpoints these must also be unblocked to allow Printix Go to communication to Printix Cloud (how to test):

Next steps

  1. Verify that your printer is supported.
  2. Prepare Kyocera printer for Printix Go.
    This involves using KYOCERA Net Viewer to install Printix Go.
  3. Install Printix Go. This will configure Printix Go to work with your Printix Home.


We make all attempts to keep the product compatibility information current. However, we make no warranties, express or implied, with respect to printer vendor’s products or the interoperation with Printix Go.

  • ECOSYS MA3500cifx, MA3500cix
  • ECOSYS MA4000cifx, MA4000cix
  • ECOSYS MA4500ix, MA4500ifx
  • ECOSYS MA5500ifx
  • ECOSYS MA6000ifx
  • TASKalfa 2553ci, 2554ci
  • TASKalfa 308ci
  • TASKalfa 3253ci
  • TASKalfa 351ci, 352ci
  • TASKalfa 3553ci, 3554ci
  • TASKalfa 358ci
  • TASKalfa 4003i, 4004i
  • TASKalfa 4054ci
  • TASKalfa 5003i, 5004i
  • TASKalfa 5054ci
  • TASKalfa 508ci
  • TASKalfa 6003i, 6004i
  • TASKalfa 6054ci
  • TASKalfa 7003i, 7004i
  • TASKalfa 7054ci
  • TASKalfa 7353ci*
  • TASKalfa 8003i
  • TASKalfa 8353ci*
  • TASKalfa 9003i
  • TASKalfa MA3500ci
  • TASKalfa MA4500ci
  • TASKalfa MZ3200i
  • TASKalfa MZ4000i
  • TASKalfa PA4500ci


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment