Last modified 2023/01/09.


  • In addition to the required internet endpoints these must also be unblocked to allow Printix Go to communication to Printix Cloud (how to test):

Next steps

  1. Verify that your printer is supported.
  2. Prepare Lexmark printer for Printix Go.
  3. Install Printix Go.


We make all attempts to keep the product compatibility information current. However, we make no warranties, express or implied, with respect to printer vendor’s products or the interoperation with Printix Go.


  • CX522
  • CX622
  • CX625
  • CX725
  • CX730, CX735
  • CX820
  • CX825
  • CX860
  • CX920, CX921, CX922, CX923, CX924, CX927
  • CX930, CX931, CX942, CX943, CX944
  • MX432
  • MX522
  • MX622
  • MX721, MX722
  • MX822, MX826
  • MX931
  • XC2235
  • XC4140, XC4143
  • XC4150, XC4153
  • XC4240
  • XC4342, XC4352
  • XC6152
  • XC8155
  • XC8160
  • XC9225, XC9235, XC9245, XC9255, XC9265
  • XC9325, XC9335, XC9445, XC9455, XC9465
  • XM1246
  • XM3142
  • XM3250
  • XM5365, XM5370
  • XM7355, XM7370


  • C2240
  • C4150
  • C4342, C4352
  • CS622
  • CS720, CS725, CS727, CS728
  • CS730, CS735
  • CS820, CS827
  • CS921, CS923, CS927
  • CS943
  • C6160
  • M3250
  • M5255, M5270
  • MS622
  • MS822, MS826

How to identify the eSF version

If the eSF version is 6 or later:

  1. Open the printer’s web page and Sign in as Administrator.
  2. Select Apps.
  3. Select App Framework Configuration.
  4. Look for Embedded Solutions and identify the Version.

If the eSF version is earlier (not supported by Printix Go):

  1. Open the printer’s web page and Sign in as Administrator.
  2. Select Reports.
  3. Select Device Settings (Menu Settings).
  4. Scroll down and look for Embedded Solutions and identify the Framework version.


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment