- Open the Networks page.
- Select Add network
- In the Add a new network dialog enter Network name.
- Select OK.
Next you need to select the gateway (and thereby the computers) that should be part of the network.
- Check Show only unknown networks.
If there are no computers on unknown networks, it will say: No computers on unknown networks.
- Select the gateway (identified by IP and MAC address).
- On the Gateway properties page, select the newly added network.
- Select Save.
How to manually add a gateway
If you know the IP and the MAC address of the gateway, you can use Printix Configurator to add the gateway to an existing network.
Thanks for your feedback.