13.17. How to add a SNMPv3 configuration

1. Select Menu , Settings
2. Select the SNMP tab.
3. Select Version 3.
4. In Configuration name enter a name for the configuration.
5. In Username enter the SNMP username exactly as it is on the printers.
6. Select Security level for communication:
   • No authentication and no privacy
   • Authentication and no privacy
   • Authentication and privacy
7. If required select an Authentication protocol and in Authentication key enter the key.
8. If required select a Privacy protocol and in Privacy key enter the key.
9. In Context name enter the context name as it is on the printers.
10. Select Save.

Printer vendor’s SNMPv3 context names

For most printer vendors the context name can be left blank. For HP it must be Jetdirect.