Use Discover printers to add printers you suspect were not found during the initial discovery. The result is securely and silently transferred to Printix Cloud without any required interaction.

  1. Open the Printers page.
  2. Select Discover printers.
  3. In Select network select Network.
  4. Optionally select a SNMP configuration
  5. Select Discover printers.

To start discovery from a particular computer:

  1. Open the Computers page.
  2. Select the computer and select Modify.
  3. Optionally select a SNMP configuration.
  4. Select Discover printers.
  5. Select Confirm.

Discovered printers:

  • After a few moments select Refresh on the Printers page.
  • If no new printers appear, then look for them on the Unregistered printers page. Otherwise, it may be that the printers are perhaps already registered, or they are on another network subnet.

Discover printers on another network subnet

Use Printix Administrator to add one of the printers on the other network subnet and then repeat the discovery.

  1. Obtained the address of one of the printers on the other network subnet.
  2. Add that printer in Printix Administrator.
  3. Start discovery again.

See also:


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment