1. Open the SNMP configuration page. You can do this as follows:
    • On the Settings page, select the SNMP tab, and under SNMP configurations select the Name of the SNMP configuration or select More and SNMP configuration.
    • On the Printer properties page select SNMP conifguration link.
  1. Under SNMP configuration select Configure and select Distribute
  1. In the Distribute SNMP configuration dialog optionally select Filters to filter on:
    • Networks
    • Vendors
  1. Check Confirm.
  2. Select Distribute to have the selected printers use the SNMP configuration. Their Printer properties page is set to the distributed SNMP configuration.

Modify printer properties of multiple printers

Alternatively you distribute the SNMP configuration by modifying Printer properties for multiple printers.

  1. On the Printers page select individual printers and select Modify.
  2. In SNMP configuration select the Modify icon if you want to change this. If you do not select an SNMP configuration, printers will continue to use their current SNMP configuration.
  1. Select Save.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment