A Konica Minolta field service engineer need to be involved to enable use of card reader. Connect the card reader directly to the external USB port located at the rear next to the network port. It may be necessary to remove the right-rear cover to access the USB port.

How to get the printer in to Service Mode

  1. On the printer’s touchscreen Login as Administrator.
  2. On the main screen select Counter.
  3. Select Display keypad.
  4. Press the Stop button.
  5. On the keypad type: 00 (zero zero).
  6. Press the Stop button.
  7. On the keypad type: 01 (zero one).
  8. Enter Password.

Enable card reader (in Service mode)

Note: Some steps are missing here, and may be dependent on the printer model.

  1. Select Authentication Device2.
  2. Select Card.
  3. Select END.
  4. Select Exit on the Service Mode screen.
  5. Power the printer off. Wait 10 seconds or more before turning power on again.

Enable card reader

Note: Some steps are missing here, and may be dependent on the printer model.

  1. Open the printer’s web page and Login as Administrator.
  2. Select User Auth/Account Track in the main menu.
  3. Select Authentication Card ID Number and change Authentication Card ID Number it from Ignore to Notify.
  4. Select OK.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment