9.4. How to install Printix Go on multiple printers

1. Select Menu , Settings
2. Select the Printix Go tab.
3. Select Go configuration name (Copy is unlocked) to open Go configuration page.

4. Select Go configuration setup to open Go configuration menu.
5. Select Assign to printers.
   • The printers MUST have a sign in profile.

6. Select Vendors and then select the printer vendor:
   • Epson
   • HP
   • Konica Minolta
   • Lexmark
   • Ricoh
   • Xerox

!For Ricoh printers you may want to consider making separate configuration(s), so in the future when you want to Update the Printix Go Ricoh software, this can be done in stages, yet efficiently. This is because the Ricoh printer will restart once and this take 5 – 10 minutes and during this period the printer is unavailable to users.

7. Optionally select Networks and then select the networks that includes the printers you wish to install Printix Go on.
8. Optionally uncheck Exclude printers with Printix Go installed.
   • The printers matching the filtered criteria will appear in the Selected printers list on the left.
   • Optionally move printers to the Excluded printers list on the right.

9. If you want to not only assign the Printix Go configuration to the printers, but also install then check Install on printers
10. Select Assign.
    • The assignment/installation is done in sequence. If it fails on one printer, it will just proceed to the next printer.
    • The screen will automatically update as assignment/installations are completed.

How to assign a sign in profile to multiple printers

1. Select Menu , Settings
2. Select the Printix Go tab.
3. Select sign in profile name (Main office) to open Sign in profile page.

4. Select Sign in profile setup to open Sign in profile menu.
5. Select Assign to printers.

6. Select Vendors and then select the printer vendor:
   • Epson
   • HP
   • Konica Minolta
   • Lexmark
   • Ricoh
   • Xerox
7. Optionally select Networks and then select the networks that includes the printers you wish to assign the sign in profile to.
8. Optionally uncheck Exclude printers with sign in profile.
   • The printers matching the filtered criteria will appear in the Selected printers list on the left.
   • Optionally move printers to the Excluded printers list on the right.

9. Select Assign.
   • The assignment is done in sequence. If it fails on one printer, it will just proceed to the next printer.
10. Optionally select Verify sign in profile.
    • The verification is done in sequence. If it fails on one printer, it will just proceed to the next printer.
      • Sign in profile username and password can not be blank.
    • The screen will automatically update as verifications are completed.