Before installing Printix Go the printer needs to be setup correctly. The printer needs to be powered on and off during this process:

  1. SSL setting
  2. Enable web browser
  3. OpenAPI setting
  4. TCP socket setting
  5. Verify access to printer
  6. Additional steps to use card reader:

SSL setting

  1. Open the printer’s web page and Login as Administrator.
  2. Select Security in the main menu.
  3. In PKI Settings select SSL Setting.
  4. On the SSL Setting page:
    • In Mode using SSL/TLS select Admin Mode and User Mode.
    • In Encryption Strength leave it at the default.
    • In SSL/TLS Version Settings you can leave it at the default (all checked), but we recommend you uncheck TLSv1.0.
  5. Select OK.
    • The web browser will change URL to https:// and may ask you to login again.
    • The web browser may ask you to confirm an “invalid certificate”.

Enable web browser

  1. Open the printer’s web page and Login as Administrator.
  2. Select Network in the main menu.
  3. Select Web Browser Setting.
  4. In Web Browser Setting select Web Browser Setting.
  5. On the Web Browser Setting page:
    • In Web Browser select Enable.
  6. Select OK.

OpenAPI setting

  1. Open the printer’s web page and Login as Administrator.
  2. Select Network in the main menu.
  3. In OpenAPI select OpenAPI Setting.
  4. On the OpenAPI Setting page:
    • In Use SSL/TLS select SSL Only.
    • In Port No. (SSL) type 50003.
    • In Client Certificates select Do not request.
    • In Validity Period select Do Not Confirm.
    • In CN select Do Not Confirm.
    • In Key Usage select Do Not Confirm.
    • In Chain select Do Not Confirm.
    • In Expiration Date Confirmation select Do Not Confirm.
  5. Select OK.
  6. Remember to select Logout and then select OK to exit the printer’s web pages, because otherwise Printix Go installation (including update and uninstall) is likely to fail and result in error messages.

TCP socket setting

  1. Open the printer’s web page and Login as Administrator.
  2. Select Network in the main menu.
  3. Select TCP Socket Setting.
  4. Select Use SSL/TLS.
  5. In Port No. (SSL/TLS) type 59159.
  6. Select OK.
  7. Remember to select Logout and then select OK to exit the printer’s web pages, because otherwise Printix Go installation (including update and uninstall) is likely to fail and result in error messages.

Verify access to printer

  1. Open the printer’s web page on the URL /OpenAPI/DeviceDescription/. Example: https://192.168.1.10/OpenAPI/DeviceDescription/
  2. You should see an XML file that includes the tag <OpenApiVersion>

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment