1. Open the native Printix App on your Android phone.
    You MUST have the role as System manager.
    • Android
      Most Android phones support NFC.
    • iOS
      Apple iPhone 7 and newer with iOS 13 or later can register NFC tags with Printix App version 2.1.6 or later.
  1. Select Menu in the top right corner.
  2. Select Register NFC tag
  3. Select the printer to register with the NFC tag.
  4. Select OK.
  5. Phone shows: Ready to scan.
    Hold the phone close to the NFC tag to scan this.
    • For optimal scanning, the distance to the NFC tag should be less than 4 cm.
    • The phone’s NFC detection area depends on the make and model and is typically on the backside near the top of the phone.
    • After registration, the NFC tag is locked and can not be written to again.
    • When the NFC tag is registered, the NFC tag’s UID is written to the NFC tag as an NFC Data Exchange Format (NDEF) message so iPhones can read the UID.
    • The message Already registered with printer ASD will appear if the NFC tag is already registered with a printer.
  1. Phone shows: Done. Select Close.
  2. Mount the NFC tag on the printer. Adhesive NFC stickers is best for this purpose.

How to unregister NFC tag

  1. In Printix Administrator open Printer properties page.
  2. To unregister, select Delete NFC tag.
  3. Select Yes.

What NFC tags should I use?

The NFC tag should be empty and not locked, so it can be programmed by the Printix App. Printix App has been tested with NFC tags in the form of stickers with these NFC chips:

  • NXP NTAG213
  • NXP NTAG215
  • NXP NTAG216

Printix does not sell NFC tags. Adhesive NFC stickers are priced at around 0.25 – 0.50 € / USD. You can buy these on the Internet.


Phone stays in “Ready to scan” when I try to register NFC tag

Test if the Android phone can scan the NFC tag while the Printix App is closed. If the phone does not show the message New tag collected, then it could be because the phone is not NFC enabled.

Test if this is also the case after you have restarted the phone.

Printix App shows error message

If the NFC tag is not compatible with Printix, you may see one of these messages:

  • Tag does not have an id, and cannot be registered
  • Write tag, error:
  • Register tag to server, error:

Please contact us with additional details.

What is written on the NFC tag

If you have issue with an NFC tag, you can install the third-party App NFC tools and use it to Read the data that is written to the NFC tag. If the tag is locked, then Writable is No.


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment