1. Open the native Printix App on your phone.
    • Android
      Most Android phones support NFC.
    • iOS
      Apple iPhone 7 and above with iOS 11 or later can be used to scan NFC tag.
  1. To print all matching documents (anywhere and later), select the NFC tag icon at the top of the page.
    To print selected documents (anywhere or later) you can A) Select the NFC tag icon at the top of the page or, B) Select Scan at the bottom of the page.
  2. Phone shows: Ready to scan.
    Hold the phone close to the NFC tag to scan this.
    • For optimal scanning the distance to the NFC tag should be less than 4 cm.
    • The message Invalid NFC tag will appear if the NFC tag is not registered with a printer.
    • The message Document is not for this printer will appear if the scanned NFC tag does not match the selected print later documents. Select Close.
  1. If there are multiple print queues for this printer, you may be asked to select one. You will not be asked if only one of these print queues is marked as favorite
    • Documents will start to print.

Why does Android phone show: New tag collected?

The message New tag collected may appear if an Android phone is held near an NFC tag without the Printix App Scan button or NFC tag icon has first been selected. Just ignore the message by selecting Back and proceed to select the Scan button or the NFC tag icon.

How to control available printer ID methods

  1. Open the native Printix App on your phone.
  2. Select Menu in the top right corner.
  3. Select Printer ID method.
  4. Select the methods you want to be available:
    • QR code
    • NFC tag
      Not available of the phone is not NFC enabled.
  1. Select OK.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment