Once configured, you can Sign in to the printer, select Scan and then the Scan to Email function. Your own email address is typically pre-filled in the To: and From: field. That way, it is very easy to have the scanned documents send to your mailbox as attachments.

Use the below steps to setup scan to email so users can scan and send emails to your company’s Microsoft 365 or Office 365 mailboxes. The steps are in accordance with option 2, as described in Microsoft documentation: How to set up a multifunction device or application to send email using Microsoft 365 or Office 365.

  1. Open a new browser window and sign in to Microsoft 365 admin center (admin.microsoft.com).
  2. On the navigation menu, select Show all….
  3. Select Settings and then Domains.
  4. On the DNS records tab, select your domain. Example: acme.com
  5. Write down the MX record POINTS TO ADDRESS value. You need the MX record in step 9.
    Example: acme-com.mail.protection.outlook.com
  1. Open the printer’s web page and Sign in as Administrator.
  2. On the Scan/Digital Send tab, select Email setup in the menu.
  1. In the section Outgoing Email Servers (SMTP), select Add…
  1. Select I know my SMTP server address or host name and type the value you obtained in step 5.
    Example: acme-com.mail.protection.outlook.com
  2. Select Next.
  1. In Set the basic information necessary to connect to the server, configure the following:
    • In Port Number, leave the value at 25.
    • In Split emails if larger than (MB), leave the value at 0.
    • Check Enable SMTP SSL/TLS Protocol and then uncheck Validate certificate for outgoing server connections.
  1. Select Next.
  1. Select Server does not require authentication.
  2. Select Next.
  1. In Server Usage, only check the functions you will use.
  2. Select Next.
  1. In Send Test Email, type a company email address (Example: john.smith@acme.com) and select Test.
  2. Select Finish.
  1. Check Enable scan to Email.
  2. Proceed to configure if email fields should be pre-filled and editable. We recommend:
    • In From:, select User’s address (sign-in required) and uncheck User editable.
  1. Select Apply.


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment