Once configured, you can Sign in to the printer, select Scan or Scan/Fax function.

Use the below steps to setup scan to email so users can scan and send emails to your company’s Microsoft 365 or Office 365 mailboxes. The steps are in accordance with option 2, as described in Microsoft documentation: How to set up a multifunction device or application to send email using Microsoft 365 or Office 365.

  1. Open a new browser window and sign in to Microsoft 365 admin center (admin.microsoft.com).
  2. On the navigation menu select Show all….
  3. Select Settings and then Domains.
  4. On the DNS records tab select your domain. Example: acme.com
  5. Write down the MX record POINTS TO ADDRESS value. You need the MX record in step 9.
    Example: acme-com.mail.protection.outlook.com
  1. Open the printer’s web page and Login as Administrator.
  2. Select Network in the main menu.
  3. In E-mail Setting select E-mail TX (SMTP).
  4. On the E-mail TX (SMTP) page:
    • In SMTP Server Address select Please check to enter host name and type the value you obtained in step 5.
      Example: acme-com.mail.protection.outlook.com
    • In Port Number leave the value at 25.
    • In Use SSL/TLS select Start TLS.
    • In Port No.(SSL) set the value to 465 or 587.
    • In POP before SMTP select OFF.
    • If SMTP Authentication is checked, then uncheck it.
  1. Select OK.
  2. After a few seconds the message appears: Completed.
  3. Select OK.
  4. Remember to select Logout and then select OK to exit the printer’s web pages, because otherwise use of printer’s touchscreen control panel (including sign in and print) is likely to fail and result in error messages.

Me button and Email sender

The Konica Minolta Email function features a Me button. Select this to scan to yourself. As you are signed in with Printix your email address is automatically prefilled in the To and From field.

Some SMTP servers will reject sending the scanned documents if the email sender (From field) does not have a specific value. To work-around this, you can specify the Email sender in the Go configuration. However, this means the Me button will also have the To field configured with this email address, and therefore will not work as intended. In this case you either have to select the receiver from the printer’s Address book or you have to entered the receiver email address on the printer’s control panel.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment