On the SNMP tab you can add, modify and delete SNMP configurations. SNMP is only used to get/read information from printers. No set/write SNMP operations are preformed.

To get here:

  1. Select Menu , Settings
  2. Select the SNMP tab.

See also:

Version 1

  • Configuration name
    The name of the SNMP configuration.
  • Get Community Name
    The default is “public”.

Version 3

  • Configuration name
    The name of the SNMP configuration.
  • Username
    The SNMP username can contain up to 31 characters in length and include any combination of alphanumeric characters (uppercase letters, lowercase letters, and digits). Space is not allowed.
  • Security level
    Select one of the following security levels for communication:
    • No authentication and no privacy
    • Authentication and no privacy
    • Authentication and privacy

Depending on the selected Security level it is required to also configure Authentication and Privacy.

Authentication

  • Authentication protocol
    Select one of the hashing algorithms:
    • SHA (Secure Hash Algorithm)
    • MD5 (Message-Digest algorithm 5)
  • Authentication key
    The key used with the selected Authentication protocol.

Privacy

  • Privacy protocol
    Select one of the encryption algorithms:
    • DES (Data Encryption Standard)
    • AES (Advanced Encryption Standard)

  • Privacy key
    The key used with the selected Privacy protocol.

Context name

The context name depends on the printer vendor. For HP it is “Jetdirect”.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment