After Sign in to Printix Client and you closed the browser window (as instructed), the Printix Client menu still does not show you as signed in and a yellow dot is shown on the Printix Client icon indicating the Printix Client is in the state Connection failed.

The reason could be that the Printix Client is reading some legacy/invalid proxy settings. Printix Client use a Windows function WinHttpGetProxyForUrl (implements WPAD) to get the proxy settings from the PAC file. However, it also looks at the proxy settings configured for the user(s) on the computer. If it finds a suitable set of proxy settings for a user, it remembers them in the registry under the LSA user (HKEY_USERS\S-1-5-18\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections). This is done to allow the Printix Service to communicate with the Printix Cloud also when there is no user signed in.

You can open the PrintixService.log file and search for: DefaultConnectionSettings:S-1-5
You should see an entry for each user that is known on the computer. The information is written to the log file every 15 minutes.

You can open the PrintixService.log file and search for: ServerComm: running with proxy
You should be able to see the address of the web proxy it is using. Example: proxy1: https://172.23.100.13:8080/.

RESOLUTION: First try to follow the steps below to delete settings from LSA user in the Windows registry.

  1. Select Windows logo key + R to open Run.
  2. Type: regedit, and select OK.
  3. In Registry Editor browse to:
    HKEY_USERS\S-1-5-18\Software\Microsoft\
    Windows\CurrentVersion\Internet Settings\Connections
  1. Delete the two entries called DefaultConnectionSettings and SavedLegacySettings.
  2. Restart the computer.
  3. Sign in to Printix Client again.

If the issue persists, you may have to delete the DefaultConnectionSettings and SavedLegacySettings for each user setting.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
Printix Support

Post Comment