Last modified 2023/08/10.
Requirements
- As a general rule, Printix Go supports Lexmark printers and MFPs that are compatible with Lexmark Embedded Solutions Framework (eSF) version 6.x.
- Latest Lexmark printer firmware version.
- See also: Lexmark documentation on: How to Check, Download, and Update with the Latest Lexmark Printer Firmware
- Printer’s date and time must match the local time.
- Printer administrator password must be set and cannot be blank.
- Printer’s DNS server must be configured.
- Computer with Printix Client must be online on the printer’s network during installation and use of Printix Go.
- In addition to the required internet endpoints these must also be unblocked to allow Printix Go to communication to Printix Cloud (how to test):
- https://device-api.printix.net
- https://on-device-api.printix.net
- https://on-device-printer-sign-in.printix.net
- https://on-device-printer-release-documents.printix.net
- https://on-device-capture.printix.net
Next steps
- Verify that your printer is supported.
- Prepare Lexmark printer for Printix Go.
- Install Printix Go.
DISCLAIMER
We make all attempts to keep the product compatibility information current. However, we make no warranties, express or implied, with respect to printer vendor’s products or the interoperation with Printix Go.
MFPs
- CX522
- CX532
- CX622, CX625
- CX635
- CX725
- CX730, CX735
- CX820, CX825
- CX860
- CX920, CX921, CX922, CX923, CX924, CX927
- CX930, CX931, CX942, CX943, CX944
- MX432
- MX522
- MX532
- MX622
- MX632
- MX721, MX722
- MX822, MX826
- MX931
- XC2235
- XC4140, XC4143
- XC4150, XC4153
- XC4240
- XC4342, XC4352
- XC6152
- XC8155
- XC8160
- XC9225, XC9235, XC9245, XC9255, XC9265
- XC9325, XC9335, XC9445, XC9455, XC9465
- XM1246
- XM3142
- XM3250
- XM5365, XM5370
- XM7355, XM7370
Printers
- C2240
- C4150
- C4342, C4352
- C6160
- CS622
- CS632
- CS720, CS725, CS727, CS728
- CS730, CS735, CS737
- CS820, CS827
- CS921, CS923, CS927
- CS943
- M3250
- M5255, M5270
- MS622
- MS632
- MS822, MS826
How to identify the eSF version
If the eSF version is 6 or later:
- Open the printer’s web page and Sign in as Administrator.
- Select Apps.
- Select App Framework Configuration.
- Look for Embedded Solutions and identify the Version.
If the eSF version is earlier (not supported by Printix Go):
- Open the printer’s web page and Sign in as Administrator.
- Select Reports.
- Select Device Settings (Menu Settings).
- Scroll down and look for Embedded Solutions and identify the Framework version.
Post your comment on this topic.